Here you can find information about Cisco Meraki MR12. Cisco is an American-based multinational technology conglomerate corporation headquartered in San Jose, California. It pioneered the concept of a local area network (LAN) being used to connect distant computers over a multiprotocol router system. It was founded in the year 1984. IP Address is a unique combination of four blocks of values ranging from 0 to 255. It is used to identify a device in the network and it can also be used to access a device identified by it. By typing the IP address of your router, you can gain access to your Cisco Meraki MR12 configuration. You can log in by using the Router Default Username listed below, which is the name of the administrator account assigned to your router by the manufacturer. Similarly, you can find the default password under Router Default Password. Note that this password should be changed after the first configuration. SSID Address is a name that other users will see while looking for the Wi-Fi in the range of Cisco Meraki MR12 router. SSID Password is a default password to your Wi-Fi network. It should also be changed in the first configuration.
| Tutorials | Cisco Meraki MR12 default IP address |
| Cisco Meraki MR12 default login and password | |
| Brand / Manufacturer | Cisco |
| Model Name | Meraki MR12 |
| Protocol | TELNET |
| CPU Frequency | 400 MHz |
| RAM Capacity | 64 MiB |
| Custom firmwares | OpenWrt |
| Flash Memory Capacity | 16 MiB |
| WiFi Standard | 300mbps (bgn) |
| WiFi bands | 2.4GHz |
| WAN Ports | 1 x 100mbps port |
| Ethernet Ports | 1 x 100mbps port |
| IP Address | 10.128.128.128 |
| Router Default Username | admin |
| Router Default Password | (blank) |
| Subnet Mask | 255.255.255.0 |
| DNS Server IP Address | 10.128.128.128 |
| Manual Link |
A-69.pdf
|